Advertisement
Mounting and using the 1-1/2" Vise
Refer to the picture of the 1-1/2" Vise below.
1. Set the Vise in the desired location (must be a flat level surface) and mark the position of the
3 mounting holes with a pencil mark. The location of the Vise must be on a surface that can
support the weight of the Vise, the workpiece and tools.
2. Use three screws (or bolts and nuts) (not included) to mount the Vise to the work surface (if
necessary, pre-drill the surface). Use best grade screws for the work surface.
3. Loosen the Swivel Handle until the top of the Vise swivels independently of the base.
Swivel the Vise to the desired direction and tighten the Swivel Handle.
4. Open the Vise by turning the Jaw Handle.
5. Insert the workpiece and close the Jaws by turning the Jaw Handle.
Note: Do not overtighten the Jaws on the workpiece, damage to the workpiece can occur.
6. When you are finished, hold the workpiece and open the Jaws by turning the Jaws Handle
and then, remove the workpiece.
1-1/2" Vise
Jaw Handle
Mounting and using the 2" Vise
Refer to the picture of the 2" Vise above.
1. Properly mount the Vise (see #1 and #2 of Operation). Open the Mounting Clamp until if fits
over the edge of the work surface. Use the Clamp Handle to tighten the Mounting Clamp on
the work surface.
2.
Loosen the Swivel Handle until the top of the Vise swivels independently of the base.
Swivel the Vise to the desired direction and tighten the Swivel Handle.
3. Open the Vise by turning the Jaw Handle.
4. Insert the workpiece and close the Jaws by turning the Jaw Handle.
Note: Do not overtighten the Jaws on the workpiece, damage to the workpiece can occur.
5. When you are finished, open the Jaws by turning the Jaws Handle and remove the workpiece.
1. Keep the Jaws and Handles clean and free of dirt, debris, or grease.
2. Before each use, make sure the Vise is securely mounted to the work surface.
Note: Replacement parts are not available for this product.
SKU 90560
Jaw Handle
Jaws
Swivel Handle
Mounting Hole
Maintenance
Operation
Jaws
1-1/2" Opening
Page 4
Swivel Handle
2" Vise
Mounting
Clamp
Clamp Handle
Advertisement
