Bottom bracket / Crankset ����������������������������������������������������������������������������� 7 service) you should register your bike� This way, you also Drivetrain �������������������������������������������������������������������������������������������������������� 7 automatically extend the warranty of your Liteville to 10 Rear derailleur hanger and rear derailleur ��������������������������������������������������� 7 years� Front derailleur ���������������������������������������������������������������������������������������������� 8 Shift cable housing �����������������������������������������������������������������������������������������...
1. Delivery contents 3. Compatibilities Damper The 601 MK4 can be ridden with dampers Suspension Forks measuring 241 mm or 250 mm� In case a Suspension forks may be mounted with a damper is exchanged, the damper socket is maximum insert length of 572 mm� Double to be adapted accordingly�...
At the chain stay, the 601 Mk4 leaves a frame� Find further information in the Rear derailleur hanger and rear derailleur clearance of about 77 mm which leads to the chapter “Bottom bracket/ crankset/ front...
In order to avoid frame damages, the Headset The frame is built in a way that only low following minimum insert lengths need to The Liteville 601 Mk4 comes with a 0° Direct Mount two-speed front derailleurs be considered: Syntace VarioSpin headset as standard�...
Headset / fork The frame comes with nothing but the cone Seatpost / seat and the cover cap for tapered fork steer The 601 Mk4 is designed for variable tubes (see picture)� seatposts with internal cable routing� Advice: Using a Syntace MegaSpacer, a The assembly is simplified thanks to the silver 0�6 mm washer needs to be added...
Note: Please mind the different cable routing options of front derailleurs offe- • You may now take the ServicePort out of red� The Liteville 601 Mk4 is compatible the frame� with front pull design solutions only� - 12 - - 13 -...
• Attach the lower end of the cable housing to the front derailleur� Cable routing rear derailleur The housing of the rear derailleur has been preassembled already� • Guide the rear end of the housing to the rear derailleur and attach it to the •...
• With the help of the Park Tool IR-1�2 or • Connect the front end of the cable housing If you assemble your bike without a the RockShox Barb Connector, the cable in the left-hand chain stay with the Park Tool Internal Cable Routing Kit, the housing including the foam tube can be threaded end part of the routing advice�...
Variable seatpost RockGuard SL Adjusting the shock absorber The 601 Mk4 is designed for a fully The Liteville 601 MK4 features an interface In order to guarantee for the perfect integrated Eightpins variable seatpost� for the Syntace RockGuard SL performance of your Rock Shox Vivid Air, it Refer to the separate Eightpins manual that Art�...
Screws the rebound of your damper further� In your Liteville dealer and have it exchanged The screws in your frame are all made from case the rear frame works too fast, open The MicroAdjust Shockmount of the 601 there or order it at Syntace directly�...
WorksFinish surface Advice: The WorksFinish frame comes The Liteville WorksFinish is a genuine with 3M stickers. It is your choice if you raw Aluminum surface, free of any kind of put them on your frame or if you do protection paint, meaning it is no Aluminum not.