& voucher leaflet attached. Rear derailleur hanger and rear derailleur Front derailleur Shift cable housing Brakes Further information on your Liteville can be found here: Seatpost http://www.liteville.com/en/72/faq-support/general/ Seatpost reduction shims Seat post clamp Please find the latest updates of your 301 manual here: Headset http://www.liteville.com/en/77/faq-support/manuals/...
B. USAGE AS INTENDED Fox damper. Find further information at www.liteville.de Liteville Bicycle user manual There is no restrictions for your Liteville 301 Mk14 1pcs. The maximum air pressure for the main damper polish pad WorksFinish frames frame as to the maximum rider weight or the Picture: Clearance down tube 1pcs.
11. Shift cable housing 14. Seatpost reduction shims 16. Headset The Liteville 301 Mk14 frame is designed for one- Use nothing but shift cable housings with an outer Using reduction shims, the minimum insert The Liteville 301 Mk14 comes with a 0° Syntace and two-speed drivetrains.
2. Seatpost / seat first ride. The 301 Mk14 is designed for variable seatposts with internal cable routing. The assembly is sim- plified thanks to the ServicePort at the lower end of the down tube close to the bottom bracket.
Picture displays exemplified 2 x 11 drivetrain, brake and ting options of front derailleurs offered. The • You may now take the ServicePort out of the variable seatpost housing. Liteville 301 Mk14 is compatible with front frame. pull design solutions only. Variable seatpost...
10. Cable routing rear derailleur 12. brake hose routing The housing of the rear derailleur has been In order to simplify the routing of the brake hose, inserted into the frame already. the frame comes with a shifting cable housing inside the left-hand chain stay.
Support the hose realized with a SRAM hose connector, too. In the The 301 Mk14 is designed for a fully integrated The SCS-III EVO6 chain guide (Art. #131040) is and the tool by simultaneously pulling and end, the brake hose can be guided through the Eightpins variable seatpost.
“prepared” for further case a bearing gets damaged anyways, you may obstacles to come as soon as possible. order the respective bearing type at your Liteville ADVICE: in case a screw can actually be • Find an even road...
SCREWS: MAXIMUM TIGHTENING TORQUE AND SECURING SCREWS 3M stickers. It is your choice if you put them The Liteville WorksFinish is a genuine raw Alu- on your frame or if you do not. minum surface, free of any kind of protection When tightening screws, always use a torque wrench such as the Syntace Torque Tool.