Recordingwiththetimer - Sharp VC-AA370 Operation Manual

Recording with the Timer
© Set the start time w!th the numer!c buttons or i/'
and press the
button
button
(only for VC-AA570)
[ Start
‫؛‬
Numeric
buttons
ậ
DATE PR START STOP
When the clock is set to 12Η (AM, PM) mode, "AM" or
"PM" wil l be automatically displayed. (In the mode of
24Η, "AM" or "PM" wil l not appear.)
or
‫؛‬
/
© Set the stop time with the numeric buttons or Ả/▼ button
button. and press the
(only for VC-AA570)
[Stop]
Numeric
buttons
DATE PR START STOP
15/12 47 12:00?K- or
/
Only for VC-AA570
o Select the speed with the ị/ĩ button.
[Tape speed]
or
NOTE
٠EP (Extended Play) and IP (long Play) recording cannot be
used with VC-AA370.
* A tape recorded in the PAI EP (Extended Play) mode can only
be playback in a VCR which have its same function (PAI EP
[Extended Play] mode).
* For best result, it is advisable to playback or recording EP
mode with this VCR,
DATE
15/12 47 12jO0fK12:30i٠
PR START STOP
NOTE
‫ ا‬SP: standard Play
« EP: Extended Play
.IP: long Play
© Press the SET button. To programme additional timer
settings, repeat steps @ through ©.
(only for VC-AA570)
[Timer review]
DATE PR START STOP
15/12 47 12:00?،12:301
SET
-
0»
CLEARjCANCED
A ▼:SELECT
SETjENTER MENU jEXIT
© To return to the normal screen, press the MENU button.
MENU
Normal
Screen
»
o
To set the VCR for automatic timer recording, press the
TIMER ON/OFF button and ensure "H" l ights on the VCR
display.
TIMER
or ‫ ئح‬ậ
0
!‫!؛‬ П'،дрп ! ‫ج‬
IU'{
NOTE
.If the video cassette runs out before recording all the programmes, your VCR will stops, shuts off and ejects the tape
automatically.
٠ If power is Interrupted for more than 24 hours (power failure, etc.), all timer settings will be cancelled.
٠ If the TIMER ON/OFF button is pressed when there is no cassette loaded, "0" flashes for 5 seconds, indicating ttiat timer
recording is not possible.
٠ It the TIMER ON/OFF button is pressed while a cassette with an uncovered erasure protection hole is loaded, "อ" flashes
and the cassette is ejected.
.When "ธ" is lit, regular VCR operation, clock setting and setting/cancelling/confirming timer positions are not possible. For
regular VCR operation, clock setting and setting/cancelling/confirming timer positions, press the TIMER ٥N/OFF button to
disengage the timer ("ธ" disappears) and then turn on your VCR.
٠ During timer recording, the timer cannot be set.
٠ To terminate timer recording, press the STOP button during timer recording.
٠ If the same time is input for the start time and the stop time, the timer setting wil l be cancelled.
Ε24