Adjusting the picture
(tracking)
Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
Press TRACKING +/– to display the tracking meter.
The distortion should disappear as you press one of
the two tracking buttons.
Tracking meter
To resume automatic tracking adjustment, eject the
tape and reinsert it.
Note
• The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP
mode on other VCRs.
83
Adjusting the picture (tracking)
Need help?
Do you have a question about the SLV-D201P Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers