Sony SLV-D201P Operating Instructions (primary manual) Operating Instructions Manual page 20

Notes
• The clock cannot be set automatically if you do not receive a channel that carries a time
signal in your area. If so, set the clock manually (page 20).
• If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 20 minutes. If nothing happens even after you wait about
20 minutes, set the clock manually (page 20).
• If you made Hookup 3, make sure you leave the cable box on.
• To record TV programs using the timer, you must set the clock accurately.
• The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
Using Manual Clock Set
Before you start...
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set the "RF Output Channel" to "3CH" or
"4CH" in "OPTION SETUP" menu
(page 87). If your TV is connected to the
DVD-VCR using A/V connections, set the
TV to video input.
• If the DVD player is in play mode, you
cannot display the "SETUP MENU." Stop
the DVD playback.
1
2
20
Setting the clock
Press SET UP.
The "SETUP MENU" appears.
Press V/v/B/b to select
Adjust), then press ENTER.
The "CLOCK SET/ADJUST" menu appears.
(Clock Set/
SET UP
V/v/B/b
ENTER
O RETURN