Recording A Disc Image On A Cd-R/Rw - Sony SonicStage Simple Burner Operating Instructions Manual

3

Recording a disc image on a CD-R/RW

1
Confirm the disc image to be recorded.
Once audio data is recorded on a CD-R/RW, you cannot edit it.
Note
Once you start recording by clicking
2
Insert a CD-R/RW into a CD-R/RW drive of your computer.
Notes
• Use CD-Rs/RWs of 650 MB or 700 MB only. If you use other types of CD-Rs/RWs, you may not be
able to record tracks or files successfully.
• You cannot record on a CD-R/RW where audio data has already been recorded using software other
than the ATRAC CD burner software such as SonicStage Simple Burner. Make sure that you use a
new CD-R/RW or a CD-R/RW where audio data has been recorded using the ATRAC CD burner
software.
• Close all other Windows applications. Make sure to close any virus-check software, as such software
application usually demands large amounts of system resources.
BURN
The disc image to be recorded
[Disc info]
BURN, you cannot cancel it.
Continued
21