Attaching The Paper Tray - Sony UP-CX2 Operating Instructions Manual

6
Close the ink ribbon holder cover until it snaps into
place.
Note
If there is any slack in the ink ribbon, tighten the slack
by winding the spools.
7
Insert the ink ribbon holder into the compartment, and
push the indented area of the handle (indicated by the
arrow) until the holder is completely inserted.
Note
Be sure to insert the ink ribbon holder fully into the
unit.
8
Close the side door.

Attaching the Paper Tray

Attach the supplied paper tray.
About 50 sheets of printouts can be left on this paper tray.
However, the number of printouts which can be
accumulated on the paper tray changes according to the
environment condition where the printer is used or the
printed image. Remove the printed sheets accumulated on
the paper tray as soon as possible.
Raise the paper eject stopper when printout size is small.
Raise the eject paper stopper.
Note
Do not touch the printouts until they have been ejected
from the printer. If a printout gets stuck in the eject slot,
remove it from the slot immediately.
Loading Paper Roll and Ink Ribbon
13