Changing The Plug - Russell Hobbs RHB03 Instructions And Warranty

If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the problem
and you need to return the appliance, make sure that:
•
The unit is packed carefully back into its original packaging.
•
Proof of purchase is attached.
•
A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised service
agent, in order to avoid any hazard. If service becomes necessary within the warranty period, the
appliance should be returned to an approved Home of Living Brands (Pty) Limited service centre.
Servicing outside the warranty period is still available, but will, however, be chargeable.

CHANGING THE PLUG

Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the stated current only. Connecting to other power
sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue
Brown
If the mains cord does not have a green and yellow wire then do not connect anything to the
Earth pin.
= Neutral
= Live
11