Turning On The Test Set The First Time; Initializing The Test Set Using A Usb Mouse And External Monitor - Agilent Technologies E6630A Getting Started Manual

Turning on the test set the first time

Initializing the test set using a USB mouse and external monitor

Steps
1 Connect a mouse and
keyboard
2 Connect a VGA monitor
3 Power on the test set
Getting Started Guide
During the initial power-on process, the test set turns off and restarts
several times. This only happens during the initial installation process.
Actions
•
Connect the mouse and
keyboard to two of the USB
ports on the front panel
panel of the test set.
•
Connect the monitor to the
monitor port on the front
panel of the test set.
a Position the test set so you
have easy access to the
power cord and plug it in.
b Press the power switch
(located near the top right
corner of the PXI rack) to
turn the test set on.
Notes
•
Model E6630A has no display; an external monitor
is required.
•
See "Virtual Front Panel"
•
See "Test Set Location and Rack Mounting
Requirements and "Power requirements"
for more details.
•
The test set can require more than 5 minutes to
power-on. This is affected by Windows start-up
requirements.
•
The Agilent Technologies screen appears followed
by a screen that allows you to select the operating
system.
•
At this time, it is safe to turn off the test set before
starting the Setup Wizard.
Quick-Start
on page 34.
on page 22
1
15