Controlling The Volume Of Your Av Amplifier (Receiver) With The Remote - Sony RDR-GXD310 Operating Instructions Manual

Sony dvd recorder operating instructions rdr-gxd310
Hide thumbs Also See for RDR-GXD310:
Table of Contents

Advertisement

4
Release [/1.
When the TV/DVD switch is set to TV, the
remote performs the following:
Buttons
[/1
2 (volume) +/–
PROG +/–
t TV/DVD
Number buttons
and SET, -/--*
* If you use the number buttons to select the TV's
programme position, press -/-- followed by the
number buttons for two-digit numbers.
To operate the t TV/DVD button
(for SCART connections only)
When the TV/DVD switch is set to DVD, the
t TV/DVD button switches between the
recorder and the last input source selected on the
TV. Point your remote at the recorder when using
this button.
When you connect the recorder to the TV via the
SCART jacks, the input source for the TV is set to
the recorder automatically when you start
playback. To watch another source, press the
t TV/DVD button to switch the TV's input
source.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Manufacturer
Sony
Aiwa
Grundig
Hitachi
Loewe
Nokia
Panasonic
Philips
Saba
20
Operations
Turns your TV on or off
Adjusts the volume of
your TV
Selects the programme
position on your TV
Switches your TV's
input source
Selects the programme
position on your TV
Code number
01 (default)
01 (default)
11
23, 24, 72
06, 45
15, 16, 69, 73
17, 49
06, 07, 08, 23, 45, 72
12, 13, 36, 43, 74, 75
Manufacturer
Samsung
Sanyo
Sharp
Telefunken
Thomson
Toshiba
LG
JVC
Controlling the volume of your AV
amplifier (receiver) with the
remote
1
4
Number buttons
7
1
Slide the TV/DVD switch to DVD.
2
Hold down [/1, and enter the
manufacturer code (see the table below)
for your AV amplifier (receiver) using the
number buttons.
3
Release [/1.
The 2 (volume) +/– buttons control the AV
amplifier's volume.
If you want to control the TV's volume, slide
the TV/DVD switch to TV.
z Hint
If you want to control the TV's volume even when the
TV/DVD switch is set to DVD, repeat the steps above
and enter the code number 90 (default).
Code number
06, 22, 23, 71, 72
25
29
12, 13, 36, 43, 74, 75
12, 13, 43, 74, 75
38
06
33
TV/DVD
switch
[/1
2
3
5
6
8
9
2 +/–
0

Advertisement

Table of Contents
loading

Table of Contents