Controlling Your Tv Or Av Amplifier (Receiver) - Sony RDR GX7 Hookups And Settings

Sony rdr gx7 dvd player user manual

Hide thumbs

Table Of Contents

Table of Contents

Controlling Your TV or AV

Amplifier (Receiver)

You can control your TV with the supplied remote by adjusting

the remote control's signal.

If you connected the recorder to an AV amplifier (receiver), you

can also control the volume with the supplied remote.

Number buttons,

-/--

Notes

• Depending on the connected unit, you may not be able to control your

TV or AV amplifier (receiver) with some or all of the buttons below.

• If you enter a new code number, the code number previously entered

will be erased.

• When you replace the batteries of the remote, the code number may be

reset to the default setting. Set the appropriate code number again.

Controlling TVs with the remote

a Slide the TV/DVD switch to TV.

b Hold down [/1.

c Enter your TV's manufacturer code (see

"Code numbers of controllable TVs" below)

using the number buttons.

d Release [/1.

When the TV/DVD switch is set to TV, the remote

performs the following:

[/1

Turns your TV on or off

2 (volume) +/–

Adjusts the volume of your TV

(wide mode)

Switches to or from the wide mode of a

wide-screen TV

t (TV/video)

Switches your TV's input source

PROG +/–,

Selects the programme position on

Number buttons, -/--*

your TV

* If you use number buttons to select the TV's programme position,

press -/-- followed by the number buttons for two-digit numbers.

To operate the TV/DVD button

(for SCART connections only)

The TV/DVD button switches between the recorder and the last

input source selected on the TV. Point your remote at the

recorder when using this button. The button works even if the

TV/DVD switch is set to DVD.

When you connect the recorder to the TV via the SCART

(EURO AV) jacks, the input source for the TV is set to the

recorder automatically when you start playback. To watch

another source, press the TV/DVD button to switch the TV's

input source.

Code numbers of controllable TVs

TV/DVD switch

If more than one code number is listed, try entering them one at

a time until you find the one that works with your TV.

"/1

Manufacturer

PROG +/–

Sony

Aiwa

2 +/–

Grundig

Hitachi

Loewe

TV/DVD

Nokia

Panasonic

Philips

Saba

Samsung

Sanyo

Sharp

Telefunken

Thomson

Toshiba

Code number

01 (default)

08, 45

15, 16, 69

17, 49

06, 07, 08

12, 13

06, 22, 23