Bluetooth Connetion - Waveshare Alphabot2 User Manual

Alphabot2 for micro:bit User Manual

BLUETOOTH CONNETION

Before programming, you need to install the Bluetooth APP to your phone. (This app
only support Android)
Bluetooth App for Android
⚫
1. Place bluetooth *** service
- This there are several services can be used
2. Place on Bluetooth connected
- Make micro:bit show "C" if Bluetooth is connected
3. Place Bluetooth disconnected
- Make micro:bit show "D" if Bluetooth is disconnected
4. Download the script to micro:bit and test
5. After downloading, you need to hold buttons A and B of micro:bit at the same
time, and then press reset button, after Bluetooth icon is showed on LEDs matrix,
release buttons. This step is to set the micro:bit to pairing mode.
blocks in on start
and show string "C"
and show string "D"
blocks
blocks
46 / 76