Table of Contents
Advertisement
Step 5: Connecting the
Mains Lead
Connect the supplied mains lead to the AC IN terminal of the
recorder. Then plug the recorder and TV mains leads (power
cords) into the mains. After you connect the mains lead, you
must wait for a short while before operating the recorder.
You can operate the recorder once the front panel display lights
up and the recorder enters standby mode.
Step 6: Preparing the
Remote
You can control the recorder using the supplied remote. Insert
two R6 (size AA) batteries by matching the 3 and # ends on
the batteries to the markings inside the battery compartment.
When using the remote, point it at the remote sensor
recorder.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly
when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or a lighting
apparatus. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time, remove the
batteries to avoid possible damage from battery leakage and corrosion.
10
Step 5: Connecting the Mains Lead
~
AC IN
to AC IN
mains lead
on the
If you have a Sony DVD player or more
than one Sony DVD recorder
If the supplied remote interferes with your other Sony DVD
recorder or player, set the command mode number for this
recorder and the supplied remote to one that differs from the
other Sony DVD recorder or player.
The default command mode setting for this recorder and the
supplied remote is DVD 3.
SYSTEM
MENU
RETURN
a Press SYSTEM MENU.
The System Menu appears.
b Press M/m to select "SETUP," then press
ENTER.
SETUP
Settings
Channel Setting
Video
Channel List
Audio
Clock
Features
Language
Options
Easy Setup
c Press M/m to select "Options," then press
ENTER.
SETUP
Settings
Format Disc :
Selectable
Video
Bilingual Recording :
Main
Audio
Dimmer :
Bright
Features
Auto Display :
On
Options
Command Mode :
DVD3
Factory Setup
Easy Setup
M/m, ENTER
COMMAND MODE
Advertisement
Table of Contents
