Connecting To Your Tv - Sony RDR GX7 Hookups And Settings

Connecting to your TV

A
This connection will use your TV's speakers for sound. If you
use the SCART (EURO AV) cord in pattern A of "Step 3:
Connecting the Video Cords" (page 5), you do not have to
connect audio cords to your TV.
LINE 1 - TV LINE 3/DECODER
AERIAL
IN
COAXIAL
LINE 4 IN
OUT
R-AUDIO-L VIDEO S VIDEO
OPTICAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
A
to LINE 2 OUT (R-AUDIO-L)
LINE 2 OUT
R-AUDIO-L VIDEO S VIDEO
(yellow)*
(white)
(red)
Audio/video cord (supplied)
: Signal flow
* The yellow plug is used for video signals (page 6).
Hint
z
When connecting to a monaural TV, use a stereo-mono conversion cord
(not supplied). Connect the LINE 2 OUT (R-AUDIO-L) jacks to the
TV's audio input jack.
Note
Do not connect the LINE 4 IN (R-AUDIO-L) jacks to your TV's audio
output jacks at the same time.
8
Step 4: Connecting the Audio Cords
DVD recorder
~
AC IN
Y
LINE 2 OUT
C
B
R-AUDIO-L VIDEO S VIDEO
C R
COMPONENT
VIDEO OUT
TV
INPUT
(yellow)
VIDEO
(white)
L
(red) AUDIO
R
Connecting to a stereo amplifier
B
(receiver) and 2 speakers/Connecting
to an MD deck or DAT deck
If your stereo amplifier (receiver) only has audio input jacks L
and R, use . If your amplifier (receiver) has a digital input
B-1
jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the recorder directly to the MD
deck or DAT deck without using your stereo amplifier
(receiver).
LINE 1 - TV LINE 3/DECODER
AERIAL
IN
COAXIAL
LINE 4 IN LINE 2 OUT
OUT R-AUDIO-L VIDEO S VIDEO R-AUDIO-L VIDEO
OPTICAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
Coaxial digital cord
B-2
(not supplied)
COAXIAL
OPTICAL
DIGITAL OUT
PCM/DTS/MPEG/
or
DOLBY DIGITAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
: Signal flow
Hint
z
For connection B-1 , you can use the supplied audio/video cord instead
of using a separate stereo audio cord.
.
B-2
DVD recorder
~ AC IN
Y
C B
S VIDEO
C
R
COMPONENT
VIDEO OUT
B-1
LINE 2 OUT
R-AUDIO-L VIDEO S VIDEO
to LINE 2 OUT
(R-AUDIO-L)
(red) (white)
Stereo audio
cord (not
supplied)
(red) (white)
to audio input
MD deck/DAT deck