Panasonic VL-SV74 Operating Instructions Manual page 12

3. Preparation
Wide mode
(default setting)
Images are not zoomed.
The full camera image is
displayed.
Note:
R The zoom feature uses a digital zoom. As a result,
the image quality of zoomed images is lower than
wide display images.
R You can switch between wide and zoom modes and
adjust the zoom position while monitoring or on a call.
See page 19.
Selecting wide or zoom
N ® select "Initial settings" ®
1. Press M
.
2. Select "Wide/Zoom settings" ®
R If there are multiple doorphones, select the
doorphone to be configured ®
3. Select the desired setting ®
– "When visitors come": Your settings will be
used when you answer calls from visitors.
– "When monitoring": Your settings will be used
when you are monitoring.
4. Select the desired display mode ®
R A beep sounds and the settings are changed.
5. When finished, press M
Note:
R If you select "Zoom", adjust the zoom position so that
people or objects that you want to view are displayed
centrally in the screen.
R When images are recorded in zoom mode, only the
zoomed area is recorded.
Selecting the zoom position (pan/tilt position)
You can select which area of the image is displayed
when displaying zoomed images.
N ® select "Initial settings" ®
1. Press M
.
2. Select "Zoom position settings" ®
R If there are multiple doorphones, select the
doorphone to be configured ®
R A zoomed image from the doorphone is
displayed.
3. Select the desired zoom position ®
R A beep sounds, the settings are changed, and the
display turns off.
4. When finished, press M
Note:
R If you do not perform any operations for 90 seconds
while changing this setting, the setting is cancelled
and the screen turns off.
12
Zoom mode
Images are zoomed.
Images are displayed 2
times larger than wide
display.
.
.
.
.
N.
.
.
N.
.