Limitation (Wrong Connection Example); Disconnecting The Drive From The Computer - Sony PCGA-DDRW2 Operating Instructions Manual

Limitation (wrong connection example)

Do not connect this drive to two computer as shown below.
i.LINK cable

Disconnecting the drive from the computer

With the Windows XP operating system, no special procedures are needed
to disconnect the drive. Simply make sure that no application programs are
active and that the drive's BUSY indicator is not on, and then disconnect
the peripheral cable or i.LINK cable.
Notes
• Before disconnecting the drive, close any running software.
• When a Digital Video Camera Recorder is connected to the drive, disconnect the
i.LINK cable from the Digital Video Camera Recorder before turning off the Digital
Video Camera Recorder.
z
Hint
To use the drive again after disconnecting the peripheral cable or i.LINK cable, perform
the steps described in the section "Connecting the Drive" on page 12. The drive will be
detected automatically by your Windows operating system.
Peripheral cable
GB
23