Connection through USB
Note
This product including bundled software functions properly under Windows XP and
Windows 2000.
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
Before Connection
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with a USB connector, install a USB
interface card.
• Have the manual for your computer handy.
Installation
These instructions apply to most commonly used computers.
1
Start your computer.
2
Connect the necessary cables.
• Connect the USB cable to the drive's USB connector.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive's DC IN jack, and connect the power cord
to the power outlet.
Note
This drive does not have a power switch. The drive turns on when connected to a power
supply with the AC adapter.
AC power cord
AC adapter
USB Cable
13