Table of Contents
Advertisement
z
You can select "AUDIO" directly
Press AUDIO on the remote. Each time you press the button, the
item changes.
Notes
• Depending on the DVD, you may not be able to change the
languages even if multilingual tracks are recorded on the DVD.
• While playing the CD/VIDEO CD, standard stereo playback
will be resumed when:
– you open or close the disc tray
– the player enters standby mode by pressing @/1 on the
remote
– you turn the power off by pressing ! on the player
• While playing the DVD, the sound may be changed when:
– you open or close the disc tray
– you change the title
• If "DTS" is set to "OFF" in "AUDIO SETUP," the DTS track
selection option will not appear on the screen even if the disc
contains DTS tracks.
Displaying the audio information of the
disc
When you select "AUDIO," the channels being played are
displayed on the screen.
In Dolby Digital format, multiple signals ranging from
monaural to 5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of the
recorded channels may be different.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 0 1 : 3 2 : 5 5
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
* "PCM," "DTS" or "DOLBY DIGITAL" is displayed. In
case of "DOLBY DIGITAL," the channels in the playing
track are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2 . 1
Front component 2
+ Center component 1
** The letters in the program format display mean the
following:
L:
Front (left)
R:
Front (right)
C:
Center (monaural)
LS:
Rear (left)
RS:
Rear (right)
S:
Rear (monaural) – the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital signal.
LFE: LFE (Low Frequency Effect)
PLAY
DVD
Current
audio
format*
C
R
Current
LFE
playing
program
RS
format**
LFE (Low
Frequency Effect)
component 1
31
Hide quick links:
Advertisement
Table of Contents
