Receiving Selcalls And Status Messages; Reviewing Messages In The Queue Memory - Kenwood TK-7180 Instruction Manual

5 Press the <B and C> keys to select the status ID you want to transmit.
• If programmed by your dealer, you can also use the
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using an optional DTMF
keypad or by selecting digits with the
first press and hold the S or DTMF
through the digits to select a digit. The cursor can be shifted to the left or right by
pressing the <B or C> key. Repeat this process until the entire ID is entered.
6 Press the Call 1 to Call 6 key to initiate the Status call.
R S
ECEIVING ELCALLS AND
When you receive a signal containing the correct tones, squelch opens and you
will hear the call.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the key programmed as Monitor.
• Your dealer can program the Monitor function to close again after a specific time period
elapses.
• If Transpond for 5-tone Signaling is programmed, an acknowledgement signal is
returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will sound when the
correct tones are received.
• Your dealer can program the transceiver to display the received Selcall/Status.
To respond to the call, press the microphone PTT switch and speak into the
microphone.
R M
EVIEWING ESSAGES IN THE
A maximum of 15 received messages can be stored in the Queue memory of
your transceiver. Saved messages can be viewed after reception. When the
Queue memory is full, the oldest message will be erased when a new message is
received.
Then icon lights when a message is stored in the Queue memory.
1 Press the key programmed as Queue to enter Queue Mode.
2 Press the <B and C> keys to select the desired message.
• If programmed by your dealer, you can also use the
• Press and hold the S or DTMF
channel name, and the time of the received message.
3 Press the S or DTMF
• To delete the selected message, press the A or DTMF # key. To confirm the
deletion, press the S or DTMF
• To delete all messages, press and hold the A or DTMF # key for 1 second. To
confirm the deletion, press the S or DTMF
14
and
key. When using the
S M
TATUS ESSAGES
Q M
UEUE EMORY
key to toggle between the called ID/ status ID, the
key to return to Normal Operation Mode.
key.
and keys.
keys. To enter manual input mode,
and
and keys.
key.
keys, cycle