Sony DVP-S3000 Operating Instructions / Mode d’emploi Operating Instructions Manual page 8

What cords will I need?
Audio/video connecting cord (supplied) (1)
Yellow
White (L)
Red (R)
Hookups
When connecting the cord, be sure to match the color-
coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum and noise.
pTo listen to the sound through TV speakers
Connect the TV using the audio/video connecting
cord (supplied).
CD/DVD player
LINE OUT
R–AUDIO 1–L VIDEO
R–AUDIO 2–L
pTo listen to the sound through speakers connected to
an amplifier
Connect the TV using a video connecting cord (not
supplied), and the amplifier using an audio
connecting cable (not supplied).
CD/DVD player
LINE OUT
R–AUDIO 1–L VIDEO
R–AUDIO 2–L
Make the same connections when your amplifier conforms
to "Pro Logic."
Notes
• Do not connect this
player to a video deck.
If you view the pictures
Yellow
on your TV after
White (L)
making connections
Red (R)
shown on the right, a
picture noise may
appear.
• Depending on the TV or amplifier, the sound distortion
may occur because the audio output level is high. In this
case, set "AUDIO ATT" in "CUSTOM SETUP" to "ON" in
the menu. For details, see page 43.
z
If your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord. You will get a better picture.
TV
INPUT
VIDEO
L
AUDIO
R
TV
INPUT
VIDEO
L
AUDIO
R
Amplifier
CD
L
R
Manufactured under license from Dolby Laboratories
Licensing Corporation. "Dolby", the double-D symbol
a, "Pro Logic" and "AC-3" are trademarks of Dolby
Laboratories Licensing Corporation.
Getting Started
Getting Started Playing CDs
Getting Started Getting Started
Video deck
CD/DVD
player
S video cable
(supplied)
CD/DVD player TV
S VIDEO OUT S VIDEO IN
TV
(Continued)
7 EN