Reducing The Picture Noise (Dnr); Changing The Sounds - Sony DVP-S3000 Operating Instructions / Mode d’emploi Operating Instructions Manual

Reducing the Picture Noise
(DNR: Digital Video Noise
Reduction)
You can make the picture clearer by reducing the
picture noise.
1 2 3
4 5 6
7 8 9
0
Press DNR.
Each time you press the button, the value for DNR
changes as follows:
OFF m 1 m 2 m 3
As the value increases, the picture noise will be
reduced. However, afterimages may increase.
Notes
• Depending on the disc, the effect may be difficult to tell.
• The setting for DNR returns to OFF when:
– you turn the power off
– you open or close the disc tray
Changing the Sounds Z
With DVDs on which multilingual sounds are
recorded, you can select the language you want while
playing the DVD.
With multiplex VIDEO CDs, you can select the sound
from the right or left channel and listen to the sound of
the selected channel through both the right and left
speakers. In this case, the sound loses the stereo effect.
DNR
Press AUDIO CHANGE while playing a disc.
Each time you press the button, the indication and the
DNR language/sound from the speakers change as follows:
pWhen playing a DVD
pWhen playing a VIDEO CD or a CD
z
Notes
• Depending on the DVD, you may not be able to change the
• If "DOLBY DIGITAL MODE" is set to "2" (page 43), the
Playing Discs in Various Modes Playing CDs in Various Modes
AUDIO
CHANGE
AUDIO 1 n AUDIO 2 n .....
AUDIO 1 : ENGLISH
Press
Indication You will hear
Once
1/L The sound of the left channel
Twice
2/R The sound of the right channel
Three times
1/L 2/R The standard stereo sound
You can also use the menu to switch the sound for
the VIDEO CD or the CD
Press MENU to display the menu. Then select "L/R/
STEREO" in "CUSTOM SETUP" to change the sound
(page 43).
languages even if multilingual sounds are recorded on the
DVD.
Dolby Digital (AC-3) format audio is played when:
- you open or close the disc tray
- you release Resume Play
37 EN