R e s e t B u t t o n
LED
Link
ACT
Reset Button
The behavior of the reset button is user-defined. See "Reset Button" on page 23 and the
NS520 BSP Porting Guide for LED programming information.
1 2
Color
Green
Yellow
D i g i C o n n e c t S P H a r d w a r e R e f e r e n c e
LED Descriptions
Purpose
Network link status:
–
On - unit is associated with an access point
–
Blinking slowly - unit is in ad hoc mode
–
Blinking quickly - unit is scanning for a
network
This LED is wired to the Ethernet hardware.
–
On indicates bad initialization
–
Off indicates ready
–
Blinking indicates network activity