Download  Print this page

Additional Information; Troubleshooting - Sony DVP-NS70H Operating Instructions Manual

Cd/dvd player.
Hide thumbs


Additional Information


If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer (For customers in the USA only).
The power is not turned on.
, Check that the power cord is connected
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cords are damaged.
, Check the connection to your TV (page 17)
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes
through your VCR to get to your TV or if
you are connected to a combination TV/
VIDEO player, the copy-protection signal
applied to some DVD programs could affect
picture quality. If you still experience
problems even when you connect your
player directly to your TV, try connecting
your player to your TV's S VIDEO input
(page 17).
, You have selected "PROGRESSIVE
using the PROGRESSIVE button on the
front panel (the PROGRESSIVE indicator
lights up) even though your TV cannot
accept the progressive signal. In this case,
disconnect the HDMI cord from the player
and then select "NORMAL
(INTERLACE)" so that the
PROGRESSIVE indicator turns off.
, Even if your TV is compatible with
progressive format 480p signals, the image
may be affected when you set the player to
progressive format. In this case, select
"NORMAL (INTERLACE)" using the
PROGRESSIVE button on the front panel
so that the PROGRESSIVE indicator turns
off and the player is set to normal (interlace)
, The player is connected to an input device
that is not HDCP compliant (the HDMI
indicator on the front panel does not light
up). See page 18.
, If the HDMI OUT jack is used for video
output, changing the "HDMI
SETUP" may solve the problem (page 62).
Connect the TV and the player using a video
jack other than the HDMI OUT, and switch
the TV's input to the connected video input
so that you can see the on-screen displays.
setting in "SCREEN SETUP," and switch
the TV's input back to HDMI. If the picture
still does not appear, repeat the steps and try
other options.
The picture does not fill the screen, even
though the aspect ratio is set in "TV TYPE"
, The aspect ratio of the disc is fixed on your
There is no sound.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input
jack on the amplifier (receiver) (page 21).
, The amplifier (receiver) input is not
correctly set.
, The player is in pause mode or in Slow-
motion Play mode.
, The player is in fast forward or fast reverse
, If the audio signal does not come through
COAXIAL)/HDMI OUT jack, check the
audio settings (page 66).
, While playing a Super VCD on which the
audio track 2 is not recorded, no sound will
come out when you select "2:STEREO,"
"2:1/L," or "2:2/R."
, The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format, in this case set
to "PCM" (page 65).


Table of Contents

   Also See for Sony DVP-NS70H

   Related Manuals for Sony DVP-NS70H

This manual is also suitable for:

Dvpns75h - single disc upscaling dvd playerDvp-ns71hp

Comments to this Manuals

Symbols: 0
Latest comments: