Settings For The Display (Screen Setup) - Sony DVP-NS70H Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 60).
The default settings are underlined.
SCREEN SETUP
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9 Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3
Select this when you connect a
LETTER 4:3 screen TV. Displays a wide
BOX picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
62
TV TYPE:
HDMI RESOLUTION:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
BLACK LEVEL:
BLACK LEVEL
(COMPONENT OUT)
4:3 OUTPUT:
Note
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
HDMI RESOLUTION
Selects the type of video signals output from
the HDMI OUT jack. When you select
AUTO (default), the player outputs video
signals of the highest resolution acceptable
for your TV. If the picture is not clear, natural
or to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
16:9
supplied with the TV/projector, etc.
AUTO
YC C
B R
ON
AUTO
ON
1920 1080i
:
OFF
FULL
1280 720p
720 480p
Note
Even when a setting other than "AUTO" is selected
and the connected TV cannot accept the resolution,
the player automatically adjusts the video signals
that are suitable for the TV.
YC C
B
Selects the type of HDMI signal output from
HDMI OUT jack.
YC C
B R
RGB
Notes
• If the playback picture becomes distorted, set
"YC C
B
• If the HDMI OUT jack is connected to equipment
with a DVI jack, "RGB" signals will be
automatically output even when you select
"YC C
B
Normally, select this.
Sends 1920 1080i video
signals.
Sends 1280 720p video
signals.
Sends 720 480p video signals.
/RGB (HDMI)
R
Outputs YC C
B
Outputs RGB signals.
" to "RGB."
R
".
R
signals.
R