Sony DVP-NS70H Operating Instructions Manual page 22

Connecting to audio L/R input
A
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound. Connect using the audio/video cord
(supplied).
Yellow
White (L)
Red (R)
• Surround effect (page 43)
TV: Dynamic Theater, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
22
Connecting to a digital audio
B
input jack
If your AV amplifier (receiver) has a Dolby
Digital*
input jack, use this connection.
Connect using a coaxial or optical digital
cord/HDMI cord (not supplied).
Yellow
Coaxial cord
White (L)
Red (R)
Optical cord
HDMI cord
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch)
*1
Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
2
* "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, be sure
to set "DOLBY DIGITAL" to "DOLBY
DIGITAL" and "DTS" to "ON" in Quick Setup
(page 23).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
"48kHz/96kHz PCM" in "AUDIO SETUP" to
"96kHz/24bit" (page 67).
• The surround sound effects of this player cannot
be used with this connection.
• When you connect the player to an AV amplifier
(receiver) using an HDMI cord, you will need to
do one of the following:
– Connect the AV amplifier (receiver) to the TV
with the HDMI cord.
– Connect the player to the TV with a video cord
other than HDMI cord (component video cord, S
VIDEO cord, or audio/video cord).
1 2
or DTS* decoder and a digital