Advertisement
Press "
" to select output of waveform. The indicator
to continuous wave output; if the indicator
output; if the indicator
Start or pause output:
Under the status of stand-by or adjustment completes, press "
pause the output from host machine; when the host is starting output, the start up
working indicator
lights; when the host is pause or stand-by, the pause indicator
lights.
4. Prompt Volume Adjusting Functions
The prompt volume can be adjusted according to the using environment.
Adjustment: under status of stand-by, press "
control panel (under condition of all indicators no light), press "
3 seconds to enter the function of volume adjustment; Energy display "5"means
default volume; press "Energy increase key"
"Energy decrease key"
for volume adjustment; no any operation after you have adjusted the suitable
volume, the host machine will automatically save the current setting after energy
display flashes for 5 seconds, and return to the current status.
How to take care of your Pelactiv Ultrasonic Machine:
1. The probe should be kept clean. Clean and sterilize the probe with alcohol
or other agents after use.
2. DO NOT use the probe toward eyes when ultrasonic wave is in use.
3. Pelactiv Ultrasonic serum or moisturiser should always be used to
supplement and ensure there is sufficient moisture on the skin.
4. The treatment time should not more than 20mins and should be shortened
appropriately for the small areas of the skin to be treated, prolonged time
will cause the skin to tire and serums will prove difficult to absorb into the
skin.
5. The handpiece should not be used for long periods of time in one particular
area or part of skin as this may cause irritation and damage.
6. The flexible cables for probes and instrument should be in order. DO NOT
twist.
7. If power cord is broken, please use the dedicated cable from the
manufacturer. We suggest using accessories only from the original supplier.
Daily maintanence:
1. T ake care with the handpiece during use, after use the handpiece should be
sterilized appropriately, wiped dry, and kept in clean, dry place.
2. The instrument should be wiped with dry cloth, DO NOT soak in water.
3. Please switch off the main power after daily use and remove the plug when
treatment is completed.
4. T he instrument should NOT be placed in sunlight, wet conditions, high moisture
areas, dust and smoke accumulated area.
20
Pelactiv Ultrasonic System
lights meaning to hybrid wave
lights meaning to board pulse wave output.
to turn down the volume, there are total 9 levels
lights meaning
" to start or
" key to turn off all displays on
" key for
to turn up the voice, and
Advertisement
