Advertisement
Pelactiv Ultrasonic Treatment procedure
1.
Get to know your Client
Client to complete Client Profile on their first Pelactiv Ultrasonic
treatment.
2.
Prepare
Organise your Pelactiv Ultrasonic Machine to the correct setting for
your clients requirements depending on their skin type and desired
treatment.
3.
Cleanse
Double cleanse the face, neck and décolletage with Pelactiv Gentle
Foaming Cleanser OR Pelactiv Hydrating Cream Cleanser. Remove
with sponges, fibrella wipes or towel.
4.
Analyse Clients Skin Type and discuss skin concerns and desired results.
Complete Client Profile Card in every treatment. Discuss Clients skin
type concerns and needs and start Skin Renewal Treatment based on
skin type analysis.
Oily/Acne skin
Combination skin
Dry/Devitalised skin
Mature/Sun damaged skin
Sensitive Skin
5.
Prepare the skin for treatment
Apply Prep Accelerator to face, neck and décolletage with cotton
pads. Tissue the skin until completely dry.
6.
Skin Renewal Treatment.
Explain to Client that when the solution is applied to the skin they may
feel a slight tingling or prickling sensation.
Cover clients eyes with dampened cotton pads.
Monitor your start time for application.
Using application brush - apply a light coat of Pelactiv System 1-Blue
Solution and leave on for a maximum of 6 minutes.
Monitor client's skin and comfort zone.
* NOTE: Only Pelactiv System 1-Blue can be used in conjunction with
the Pelactiv Ultrasonic Machine.
7.
Remove the solution thoroughly with cool water and Pelactiv towel/
Fibrella wipes.
8.
Balance
14
Pelactiv Ultrasonic System
Advertisement
