Advertisement
1. Face probe output
4. Main power switch
Connection instruction:
1. Connect the power cable with host machine;
Plug-in separately fl exible cables of ultrasonic
wave probe with corresponding output at
back of host machine.
2. Press the key "
is stand-by.
>Time display "15";
>Energy display "5";
>Face probe working indicator
>Continuously working status indicator
>On the right side of start/pause " " indicator lights
In this situation, press START/PAUSE key to turn on output of host machine.
3. Ultrasonic Wave Function Adjustment
Time setting:
Press key "
" and "
time range 1~30 min.
Energy adjustment:
Press "
" and "
adjustment levels 1~9.
Output probe selection:
Press "
" key for ultrasonic wave control to select the output probe. >The
indicator
lights meaning to the face probe is selected currently; indicator
lights meaning to the body probe is selected currently; indicator
meaning to the eye probe is selected currently;
Waveform output selection:
19
Pelactiv Ultrasonic System
2. Eyes probe output
5. Power input plug
" on control panel,
lights
" for TIMER" to set up the working time of host machine,
" for "ENERGY" to control the energy output of host machine
3. Body probe output
6. Protective tube plug
indicator lights, host machine
lights
lights
Advertisement
