Step 3: Connecting The Video Cords - Sony DVP-NS36 Operating Instructions Manual

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
A
(yellow)
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
to LINE OUT (VIDEO)
l : Signal flow
If you are connecting to a video input jack
A
Connect the yellow plug of an audio/video cord (not supplied) to the yellow (video) jack. You
will enjoy standard quality images.
White (L)
Red (R)
If you are connecting to a SCART input jack
B
Connect a SCART cord (not supplied). Be sure to make the connections firmly to avoid hum and
noise. When you connect using the SCART cord, check that the TV conforms to S video or RGB
signals. Refer to the operating instructions supplied with the TV to be connected. Also, when
you set "LINE" to "S VIDEO" or "RGB" under "SCREEN SETUP" in the Setup Display
(page 63), use a SCART cord that conforms to each signal.
Audio/video
cord (not supplied)
Yellow
(yellow)
to LINE (RGB)-TV
L C E N T E R
INPUT
TV
SCART cord
(not supplied)
CD/DVD player
Yellow
White (L)
Red (R)
,continued
B
15