Sony DVP-NS36 Operating Instructions Manual page 18

Connecting to audio L/R input
A
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound. Connect using the audio/video cord
(not supplied).
Yellow
White (L)
Red (R)
• Surround effect (page 41)
TV: Dynamic Theatre, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
18
Connecting to a digital audio
B
input jack
If your AV amplifier (receiver) has a Dolby
Digital*
and a digital input jack, use this connection.
Connect using a coaxial digital cord (not
supplied).
Yellow
Coaxial cord
White (L)
Red (R)
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG
audio (5.1ch)
*1
Manufactured under license from Dolby
Laboratories.
"Dolby," "Pro Logic," and the double-D symbol
are trademarks of Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 19).
If your AV amplifier (receiver) has an MPEG
audio decoder function, set "MPEG" to "MPEG"
in Audio Setup (page 66). Otherwise, no sound or
a loud noise will come from your speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 19).
1 2
, DTS* or MPEG audio decoder