Sony DVP-NS36 Operating Instructions Manual page 20

7
Press X/x to select the setting that
matches your TV type.
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 63)
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 63)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
9
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
Video signals
• VIDEO (page 63)
S video signals
• S VIDEO (page 63)
RGB signals
• RGB (page 63)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
20
JACKET PICTURE
VIDEO
VIDEO
S VIDEO
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
If you did not connect an AV amplifier
(receiver), select "NO," then go to step
15.
If you connected an AV amplifier
(receiver) using just an audio cord, select
"YES: LINE OUTPUT L/R (AUDIO),"
then go to step 15.
If you connected an AV amplifier
(receiver) using coaxial digital cord,
select "YES: DIGITAL OUTPUT."
12
16:9
Press X/x to select the type of
ON
Dolby Digital signal you wish to
send to your amplifier (receiver).
RGB
If your AV amplifier (receiver) has a
Dolby Digital decoder, select "DOLBY
DIGITAL." Otherwise, select "D-PCM."
13
Press ENTER.
"DTS" is selected.
14
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
If your AV amplifier (receiver) has a
DTS decoder, select "ON." Otherwise,
select "OFF."
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS: DOLBY DIGITAL
48kHz/96kHz PCM:
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
OFF
STANDARD
ON
D-PCM
D-PCM
48kHz/16bit
OFF
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON