Multimedia - Sanyo XT-32A081H Owner's Manual

Multimedia

You can also select Media input by selecting input AV button.
In USB state, if no USB device connected, the USB
interface will be displayed.
Picture:
1. Select Picture icon, then press OK button to enter the
USB device.
2. Press Up, Down, Left or Right direction button to select
your desired picture file and press OK to show.
3. While showing picture, press OK key of remote to display
the play console.For the Play console,you might operate
them following the directions on screen.
4.Press Return key of remote to Stop playing.
Video :
1. Select Video icon, then press OK button to enter the USB
device.
2. Press Up, Down, Left or Right direction button to select
your desired file and press OK to Play.
3. While playing a Video, press OK key of remote to display
the play console. For the Play console, you might operate
them following the directions on screen.
4. Press Return key of remote to Stop playing.
Music :
1.Select Music icon, then press OK button to enter the USB
device.
2.Press Up, Down, Left or Right direction button to select your
desired file and press OK to Play.
3.The Play console includes Fast Backward, Previous,
Play/Pause, Next, Fast forward Repeat and List icons. Use
Left & Right key of remote to navigate on the Play console.
4. Press Return key of remote to Stop playing.
Notes:
1. Under the following conditions, this system cannot
decode the file and the file cannot be play normally:
-The parameters of file, such as the pixel of picture,
code rate of audio and video file, sampling rate of
audio file, exceed the limit of the system;
-The format of file is not matched or the file is harmed.
Note: The code rate of this system does not support
exceed 20Mbps.
2. Hot plug: Do not disconnect when the system is
reading or transmitting data, avoid damaging the
system or the device.
3. Pay attention to the power supply of the device when
you are using a mobile hard disk or a digital camera.
If the power supply is not sufficient or not stable, you
may encounter problems during operating or can not
operate at all. In this case, please restart the device,
or unplug the device and plug it again, and ensure that
its power supply is normal.
4. The system supports standard USB1.1,USB2.0 and
USB3.0 devices, such as standard U-disks, MP3
players,mobile hard disks, etc..
5. For obtaining better audio and video quality, It is
suggested to use the external device which accords
with USB2.0/USB3.0 standard.
6. When playing the video with high compression ratio,
these phenomenons, such as picture standstill and
menu long time response, are normal.
7. For some USB device with power supply, such as large
size hard disk, MP4, etc., Suggests using it with power
to avoid electric power shortage. The parameters of
file, such as the pixel of picture, code rate of audio and
video file, sampling rate of audio file, exceed the limit
of the system.
22
Using your TV