Smart Tv; Network - Sanyo XT-32A081H Owner's Manual

Smart TV

Select MENU > Smart TV, then the Smart TV menu
appears on the right with the following options. Press
► ▲/▼
to enter and use
Share&See
Picture
Smart TV policy
Sound
Networked standby
Netflix settings
Channel
Reset smart TV
Smart TV

Network

System
Support
Share&See:
By connecting the TV and a device (computer,
smart phone, pad, etc.) to the same local network, you
can enjoy the music, videos and pictures shared by the
device on the TV.
Smart TV policy
1. Press MENU on the remote control, select Smart TV
and press OK to enter.
2. Select Smart TV policy and press OK to enter.
Networked standby:
Set Networked standby function to On or Off.
Press OK to display the option list. Use ▲/▼ to select
.
Reset smart TV
Allows you to reset the smart TV to factory default
settings.
1. Press MENU on the remote control, select
Smart TV > Reset smart TV and press OK to
enter.
2. Press
/ to select OK and press OK
Network
Your TV is equipped to be connected to your home
network wirelessly. To do that you need a wireless
router or modem.
Picture Internet connection
Interface
Sound
Wireless settings
Information
Channel
Connection test
Smart TV
Network
System
Support
to choose an option.
Off >
Off >
Deactivate, ESN,
On >
Wireless >
Select MENU > Network, then the Network menu
appears on the right with the following options. Press
► to enter and use ▲/▼ to choose an option.
Internet connection:
1. Select Internet connection and press OK to enter.
2. Press ▲/▼
to select On and press OK
Interface:
1. Select Interface and press OK to enter.
2. Press ▲/▼ to select Ethernet or Wireless and
press OK
• Ethernet
IP settings:
Select IP settings and press OK to enter. You can
set Address type to Auto or Manual.
• Select Auto if you want the TV to acquire and
enter the needed IP address automatically.
• Select Manunal if you want to enter your IP
address manually, then:
-
- Enter the IP address. Subnet mask, Default
gateway, Primary DNS and Secondary DNS
values. Use the numeric buttons to enter
numbers and the ▲/▼/
• Once IP setting is completed, press ▲/▼ to
select OK and press OK to confirm. The set
will try to connect to the network and inform
you about the result. Press
Network menu.
Wireless settings:
Select MENU > Network, then select Wireless
settings to connect to a wireless network. You can
set the wireless network connection in 3 ways:
1. Scan: Select Wireless settings > Scan, then
press OK, the TV will scan all access points
within range. The access points found by the
TV will be displayed. Select an available access
point, then press OK to connect the TV to it.
Notes:
If you select a protected access point, you will
have to enter the corresponding password.
Press OK on the remote control to display
virtual keyboard to enable you to enter it.
This set has a memory function of available
access points, which enables your set to be
connected to the network even if you switch on
TV after power off.
2. Manual:Select Wireless settings > Manual,
then press OK, you will be prompted to enter the
correct SSID of an available wireless router to set
up the connection.
18
Using your TV
/ buttons to move
to return to the