HKC SW-1070 Installation Manual page 91

Comms Menu - continued
LAN Module
(Ethernet)
Plug LAN cable in here
Remove the mains and battery supply before fitting the LAN-Card. Once the hardware is
physically fitted and powered-up and you enter the relevant programming menu you will
be prompted to activate the device in question.
WiFi Module
Remove the mains and battery supply before fitting the WiFi-Card. Once the hardware is
physically fitted and powered-up and you enter the relevant programming menu you will
be prompted to activate the device in question.
!
You cannot have the LAN and WiFi cards plugged-in together. You must pick one type of card.
91
Default Eng. Code - 4567 Default User Code - 1111 (Irl) 1234 (UK)