Checking For Blockages & Maintaining Brushroll - Shark Rotator Powered Lift-Away NV750 Series Owner's Manual

CHECKING FOR BLOCKAGES & MAINTAINING BRUSHROLL
Use the edge of a coin to open the
3 locks on the bottom of the floor nozzle.
With scissors, carefully cut along the
groove in the brushroll to remove any
debris, hair, or fibers.
Lift up the lid on the bottom of the
nozzle to access the brushroll. Use
a flashlight to check for blockages.
To reinstall the lid, line it up along the
front of the nozzle and press it closed.
Use the coin to close the 3 locks.
s h a r kc l e a n . c o m