Troubleshooting; Frequent Asked Questions - Kensence CAT-HDMI-70CT Operation Manual

3, RS232 and R port
4,DVI signal input port
1, Power interface
2,RJ45 port (network signal output)
1、RS232 and IR signal output
2、DVI signal output
4.3 Indicator light description
POWER: power indicator light, turn on the power after the light
MODE: device operating status indicator, blinking indicates that the device is operating normally
LINK: HDbaseT signal connection indicator, the device with a cable connected to a constant light
HDCP:HDCP: signal output indicator, blinking signal output is normal

5 Troubleshooting

Frequent Asked Questions

a. Network port indicator does not light up
Solution:
Figure 4.2.4 CAT-DVI-70CR-P Receiver Front and Rear Panels
4