Omega OMB-DAQ-54 User Manual page 21

Button
1 Open Configuration File
2 Save Configuration File
3 Select Active Device
4 Arm Trigger for Disk
Recording
5 Manual Trigger
6 Update Digital Outputs
7 Configure Data
Destination
8 Configure Acquisition
9 Configure Channel
Settings
10 Update All Indicators
11 Display Scrolling Charts
12 Display Bar Meters
13 Display Analog Meters
14 Display Digital Meters
15 View Data
16 Enable Readings
Column
17 Disable Readings
Column
If needed, refer to Chapter 4, Personal DaqView, for more detailed information.
1-12 Unit Startup
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Main Control Window
Channel Configuration Window, with Analog Input Spreadsheet Selected
Function
Opens a selected configuration file.
Saves the current configuration file to disk.
Provides a means of selecting active devices from the Personal Daq system.
Arms the trigger and stores acquisition data to a designated disk file. If Auto Rearm is
selected, clicking this button puts Auto rearm in effect. This button, is also used to
disarm the data acquisition.
Used to trigger the device when the mode of trigger is set to "Manual." Note that the
Manual Trigger button can not be clicked until after the trigger is armed, for example,
by first clicking button 4.
Updates digital outputs for all digital channels that are selected to "output state." also
see Digital Input/Output Spreadsheet, in Chapter 4).
Personal Daq/54.
Accesses the Configure Data Destination window. Note that this window provides a
means of selecting sequential destinations through an auto rearm feature.
Accesses the Configure Acquisition window.
Brings up the Channel Configuration window. From this window you can configure
channels for Analog Input, Frequency/Pulse Input, and Digital Input/Output channels,
depending on which tab is selected.
Starts all on-screen indicators with a display of up-to-date data. Has no affect on the
recording of data to disk. Auto Rearm, even if selected, will not occur when using this
control. This button is also used to pause all indicators.
Displays data graphically in a scrolling chart.
Displays data in a bar graph format.
Displays data displayed in a dial-gage format.
Displays data in a digital meter format.
Launches an independent post-data acquisition program, such as eZ-PostView.
Refer to the PostAcquisition Analysis PDF (included on your CD) for detailed
information.
Activates the Channel Configuration Window's reading column. Does not affect the
recording of data to disk.
Stops the Channel Configuration Window's reading column. Does not affect the
recording of data to disk.
878395
Digital I/O does not apply to
Personal Daq User's Manual