Specifications - Maxwell 6000 Series Manual

1.3

SPECIFICATIONS

General
Maximum stud link chain size
Maximum short link chain size
Maximum pull capacity at chainwheel
Electric DC Drive
Chain speed at 1000kg load
Continuous pull capacity at chainwheel
Current at 1000kg load
Motor power
Weight of windlass
Electric AC Drive
Chain speed
Continuous pull capacity at chainwheel
Current at continuous pull rating (@ 400V)
Current at start-up (@ 400V DOL)
Motor power
Weight of windlass
Hydraulic Drive
Chain speed (at Recommended flow)
Recommended hydraulic oil flow
Maximum hydraulic oil flow
Continuous pull capacity at chainwheel
Maximum hydraulic oil pressure
Motor port size (pressure and return)
Minimum size of oil supply/return lines
Weight of windlass
*See Appendix C for other options of flow and pressure.
6
16mm
19mm (3/4")
2730kg (6006lb)
10m/min (33ft/min)
680kg (1496lb)
215A
3.5kW (48HP)
195kg (429lb)
Vertical motor
15m/min (49ft/min)
1490kg (3278lb)
8.7A
47A
4kW (5.5HP)
285kg (627lb)
14m/min (47ft/min)
41l/min (11USgal/min)
76l/min (20USgal/min)
2730kg (6006lb)
138bar (2000psi)
7/8" x 14tpi UNF - SAE 10
16mm (5/8")
153kg (337lb)
Rated capacity and chain speed is based
on the chainwheel for 16mm chain. The
performance may vary slightly when other
chainwheels are used.
Horizontal motor
13m/min (43ft/min)
1286kg (2829lb)
8.2A
55A
4kW (5.5HP)
247kg (543lb)