Spare Parts; Tools For Maintenance - Maxwell 6000 Series Manual

4.4

SPARE PARTS

Maxwell recommends a modest quantity of spare
parts to be ordered as familiarity with the windlass is
developed during installation. As small parts can be
lost during maintenance, keeping spares (and spare
tools) is recommended.
We recommend the following list of spare parts per
windlass to be carried on board:
Part No. Description
3006 Retention clip
4809 Cap
SP2769 O-Ring
3566 Plunger
3567 Spring
Topworks key*
SP0718 Deck Seal
SP0840 External circlip**
*The part number will vary depending on the model,
see Appendix B.
**Hydraulic drives only.
If any other spare part is required, please refer to
Appendix B for the correct part number and contact
one of our distributors worldwide (Appendix D). When
ordering spare parts, please quote:
• Windlass model
• Serial number of the windlass
• Part number (see Appendix B)
• Part description
• Quantity required
4.5

TOOLS FOR MAINTENANCE

We recommend the following tools be kept on board
for disassembling and assembling the windlass:
• Set of metric hexagon keys (Allen keys) 5, 8, 10
and 14mm
• Ring/open end spanner 17, 19, 24mm
• Curved ring spanner (or socket spanner) 17mm
• Circlip pliers
23
Qty
2
1
1
5
5
1
1
1