Bluetooth Pairing & Operating Instructions; Using Navigation - Skully Fenix AR User Manual

BLUETOOTH PAIRING INSTRUCTIONS
System Requirements: Windows 7 or Higher, Mac OS X v10.6.8 or later
IOS and Android have inherent Bluetooth differences when paired with devices. Each
smartphone operating system update may impact how your devices communicates with the Fenix
AR helmet. Currently, both smartphone operating systems will automatically connect with the
Fenix AR helmet if you were previously connected. For example, if you stop your motorcycle,
remove your helmet and leave it with the motorcycle and walk into a store, you may lose your
Bluetooth connection. However, the connection will be re-established after your phone is
brought back into range.
First Time Pairing Instructions:
Follow these instructions for both Android and iOS: Turn on helmet
1. Make sure Bluetooth is activated on your phone
2. Turn Fenix AR on, the helmet is in pairing mode for 3 minutes after powering up helmet
(click control button 5 times to re-initiate pairing, if needed)
3. Go to Settings, Tap on Bluetooth, tap on the helmet serial number located on the helmet
ratchet strap (entry starting with SK___________ followed by 9 numbers)
a. After pairing, helmet serial number will be displayed with a
iPhone Users – QR Code Pairing
iPhone users can pair their helmets using the previous instructions or alternatively can use use
the quick start QR code method.
1. Make sure Bluetooth is activated on your phone
2. Turn Fenix AR on, the helmet is in pairing mode for 3 minutes after powering up helmet
(click control button 5 times to re-initiate pairing, if needed)
3. Then, using the mobile app:
a. Press on the "gear" icon at the bottom right of home screen
b. Select "Helmet"
c. Configure helmet by pressing "Connect to Helmet".
d. Activate the Helmet by scanning helmet strap QR Code.
e. After pairing, helmet serial number will be displayed with a
USING NAVIGATION MODE
✓
✓
18