Adjusting The Speaker Level By Using The Test Tone - Sony DAV-LF1H Operating Instructions Manual

Home theater systems: platinum dvd dream® system
Hide thumbs Also See for DAV-LF1H:
Table of Contents

Advertisement

Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
Surround speaker distance
*
3.0 m
from the listening position can
(appears when you set
be set in 0.2 meter increments
[SURROUND] to
from 0.0 to 7.0 meters.
[YES] in the
[CONNECTION]
setting.)
* When you perform the Quick Setup (page 29), the
default settings are changed.
Note
• When you set the distance, the sound cuts off for a
moment.
• Depending on the input stream, the [DISTANCE
(FRONT)]/[DISTANCE (SURROUND)] setting
may not be effective.
• When the speaker distance setting is not in the
recommended range,
being the number).
indicates over the
recommended distance.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
Set this between –15.0 dB and
0.0 dB
+10.0 dB in 1.0 dB increments.
[CENTER]
Set this between –15.0 dB and
0.0 dB
+10.0 dB in 1.0 dB increments.
(appears when you set
[CENTER] to [YES] in
the [CONNECTION]
setting.)
[SUBWOOFER]
Set this between –15.0 dB and
0.0 dB
+10.0 dB in 1.0 dB increments.
/
** m is displayed (**
indicates below.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R]
Set this between –15.0 dB and
0.0 dB
+10.0 dB in 1.0 dB increments.
(appears when you set
[SURROUND] to
[YES] in the
[CONNECTION]
setting.)
To adjust the volume of all the
speakers at one time
Press VOLUME +/– on the remote or touch
VOLUME +/– (touch panel button) on the
control unit.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Adjusting the speaker level by
using the test tone
C/X/x/c,
DISPLAY
continued
99
GB

Advertisement

Table of Contents
loading

Table of Contents