Settings For The Display - Sony DAV-LF1H Operating Instructions Manual

Settings for the Display

[SCREEN SETUP]
Choose settings according to the TV to be
connected.
Select [SCREEN SETUP] in the Setup Display.
To use the display, see "Using the Setup
Display" (page 91).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
HDMI RESOLUTION:
YC C /RGB (HDMI):
B R
SCREEN SAVER:
BACKGROUND:
LINE:
4:3 OUTPUT:
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[16:9] Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[4:3 LETTER
Select this when you connect a 4:3
BOX]
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the screen.
[4:3 PAN SCAN]
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
[16:9]
[4:3 LETTER BOX]
[4:3 PAN SCAN]
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
x [HDMI RESOLUTION]
Selects the type of video signals output from the
HDMI OUT (high-definition multimedia
interface out) jack. When you select [AUTO]
(default), the system outputs video signals of the
highest resolution acceptable for your TV.
If the picture is not clear, natural or to your
satisfaction, try another option that suits the disc
and your TV/projector, etc. For details, refer
16:9
also to the instruction manual supplied with the
AUTO
YC C TV/projector, etc.
B R
ON
JACKET PICTURE
VIDEO
[AUTO]
FULL
[1920
[1280
[720
* i: interlace, p: progressive
** Depending on the country, [720 × 480/576p] may
Note
• Even when a setting other than [AUTO] is selected
• When the HDMI indicator on the front panel lights
x [YC
Selects the type of HDMI signal output from
HDMI OUT jack.
[YC
[RGB]
Note
• If the playback picture becomes distorted, set
• If the HDMI OUT jack is connected to equipment
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
Normally, select this.
×
1080i*] Sends 1920 × 1080i video signals.
× 720p*]
Sends 1280 × 720p video signals.
×
480p*] Sends 720 × 480p video signals.**
appear.
and the connected TV cannot accept the resolution,
the system automatically adjusts the video signals
that are suitable for the TV.
up, images from the S VIDEO OUT jack is enlarged
vertically. (Except when [720 × 480p] is selected.)
C /RGB (HDMI)]
B R
C ] Outputs YC
B R
Outputs RGB signals.
[YC C ] to [RGB].
B R
with a DVI jack, [RGB] signals will be automatically
output even when you select [YC
C signals.
B R
C ].
B R
continued
93
GB