Tv Hookup (Advanced) - Sony DAV-LF1H Operating Instructions Manual

TV Hookup (Advanced)

Select a hookup suitable for the jacks on your TV.
Connecting the video/HDMI* cords
Sends a played back DVD image to a TV.
For the TV that has the HDMI jack, connect the TV and the control unit with the HDMI cord (not
supplied).
* HDMI (high-definition multimedia interface)
The system is based on version 1.1 of High-Definition Multimedia Interface Specifications.
The system incorporates High-Definition Multimedia Interface (HDMI
HDMI, the HDMI logo and High-Definition Multimedia Interface trademarks or registered trademarks of HDMI
Licensing LLC.
To connect to a TV with the COMPONENT VIDEO IN jacks
Connect a component video cord (not supplied). To use the COMPONENT VIDEO OUT jacks (Y, P
C , P /C ) instead of the video jacks, your TV monitor must be equipped with via COMPONENT
B R R
VIDEO IN jacks (Y, P
B
connection and set the output channel of the system to progressive format (page 95).
Bottom of the
subwoofer
VIDEO IN VIDEO IN Y
VIDEO 1 VIDEO 2 COMPONENT VIDEO OUT
AM
OUTPUT (TO TV)
FM 75
COAXIAL
SYSTEM CONTROL
TV with COMPONENT
VIDEO IN jacks
/C , P /C ). If your TV accepts progressive format signals, you must use this
B R R
P /C P /C
B B R R
DIR-T1
SPEAKER
INPEDANCE
CENTER
EURO AV USE 4
FRONT
L
FRONT
R
Y
P /C
B B
P /C
R R
: Signal flow
TM
) technology.
Green
Blue
Red
To the component
video input jacks
continued
/
B
35
GB