Table of Contents
Advertisement
PhoCheck+ 1, 2, 3 & 5000 Ex
Ion Science Ltd
Protective / Decontamination Cover
General Description
This unique accessory enhances the base intrinsically safe approval of Ion Science instruments, including
FirstCheck and PhoCheck, from category 2 (Zone 1) to category 1 (Zone 0) classification. The cover also
increases instrument's ingress protection rating to IP66 allowing the instruments to be used in applications
where the instruments are likely to get wet such as arson in vestigation, emergency response and in heavy
rainfall.
The cover being very low in cost has the advantage when used in HazMat applications, including possible
WMD exposure, in that it is simply removed after use and replaced with a fresh one keeping both the user
and instrument safe from exposure long after the event.
NB: the IS protective cover must be used only once. If it becomes torn or damaged the intrinsically safe
certification and ingress protection ratings revert to that of the instrument inside it.
Technical Specifications
Made from anti-static material
Baseefa02ATEX0093X / Baseefa03ATEX0742X
ll 1G, EEx ia llC T4 (-20 °C £ Ta £ +60 °C)
Dimensions: 430 mm (L) x 126 mm (W)
Please note double sided sticker adhisive must be applied in a dry atmosphere which
is > 5 °C, it will then remain effective down to -20 °C.
Page 47 of 52
Advertisement
Table of Contents
