Current eFlux Manual page 7

Programming Guide
SURGE/GYRE FLOW
Flow rate is adjustable
from 0-100% in 10%
increments by pressing
FLOW keys on wireless
remote.
Frequency (time duration) is adjustable:
Press to increase frequency of
pulse (decrease time interval)
FREQ
Press to decrease frequency of
FREQ
pulse (increase time interval)
WAVE/PULSE MODE
Flow rate is adjustable
from 0-100% in 10%
increments by pressing
FLOW keys on wireless
remote.
Frequency (time duration) is adjustable:
Press to increase frequency of
FREQ
pulse (decrease time interval)
Press to decrease frequency of
FREQ
pulse (increase time interval)
Choosing flow modes
Every aquarium is different and eFlux wave pumps provide multiple modes of flow for a wide variety
of applications.
STREAM/STEADY MODE
Steady, constant flow stream (adjustable)
Mimics strong, flowing water currents
Adjustable flow speed only, 0-100%
Excellent circulation in specific areas
When a pump is in Surge/Gyre mode, the pump will gently ramp up and down
to the maximum flow speed based on the frequency (time) programmed. This
mode mimics back and forth water surges found in the ocean. See GYRE for
using 2 pumps and creating Gyre flow.
100%
FLOW
FLOW
FLOW
50%
0
FREQUENCY (seconds)
When a pump is in Wave/Pulse mode, the pump will turn on/off, creating a
pulsing between the maximum flow and off. This flow simulates waves
commonly found on reef crests.
100%
FLOW
FLOW
FLOW
50%
0
FREQUENCY (seconds)
SURGE/GYRE MODE
Alternates a slow ramp up/down
Mimics surging water currents
Flow 0-100%, frequency 10-90 sec.
Ideal for soft corals and anemones
eFlux Wave Pump Kit
Max. Flow
FREQUENCY
10s 15s 20s 25s 30s 40s 50s 70s 80s 90s
Max. FLOW
ON
OFF
TIME
.7s
.3s .5s
.3s .5s .7s
Pump ON
.3s .5s .7s
Pump OFF
Page 7
ON
OFF
1s 2s 3s 4s 5s 6s
1s
2s 3s 5s
4s
2s 3s
1s 4s 5s
WAVE/PULSE MODE
Alternates a short pulsing action
Mimics wave type action
Flow 0-100%, frequency 0.3-7 sec.
Ideal for SPS corals
7s
6s 7s
7s
6s