Audio Settings - Sony BDP-S5000ES Operating Instructions Manual

Blu-ray disc/dvd player
Hide thumbs Also See for BDP-S5000ES:
Table of Contents

Advertisement

b
• Performance and features are not guaranteed.
• If the type of your connecting cable or connector
differs from those recommended, optimum
values may not be achieved.
• If the settings are higher than those
recommended, the fine details on the screen may
become too harsh.

Audio Settings

The default settings are underlined.
Audio Output Priority
Selects the jack type to output audio signals.
2-channel linear PCM signals are output at
48 kHz maximum from output jacks other
than the priority jacks.
HDMI
Outputs audio signals from
the HDMI OUT jack.
Coaxial/
Outputs audio signals from
Optical
the DIGITAL OUT
(OPTICAL/COAXIAL)
jack.
Multi Channel
Select this when connecting
Analog
an AV amplifier (receiver)
via the MULTI CHANNEL
OUTPUT jacks.
Stereo Analog Outputs audio signals from
the AUDIO OUT (L/R)
jacks.
Speaker Settings
To obtain the best possible surround sound,
set the speakers you have connected and their
distance from your listening position.
Then use the test tone to adjust the volume
and the balance of the speakers to the same
level.
This setting is selectable when "Audio
Output Priority" is set to "Multi Channel
Analog."
To set the speakers
1
Select "Speaker Settings" in "Audio
Settings," and press ENTER.
2
Select "Size," "Distance," and press
ENTER.
49
,continued

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents