Preparing A Power Source (Dry Battery) - Sony BDP-S1 Manual Addendum: Audio Codec Information (firmware ver 2.0 or higher) Operating Instructions Manual

Display

Character information display
(  page 18)

Atrac3plus/MP3 indicator (  page 5)

Disc indicator (  page 14)

Battery indicator (  page 12)

Play list indicator

Group indicator

Bookmark indicator (  page 21)

Play mode indicator

Timer indicator (  page 26)

Sound indicator
1) This button has a tactile dot.
2) For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
10
Preparing a Power
Source
(Dry Battery)
Use only the following dry battery type for
your CD player:
• LR6 (size AA) alkaline battery
1
Slide the OPEN switch to open the
lid of your player.
2
Open the battery compartment lid
inside the player.
Battery
compart-
ment lid
3
Insert the LR6 (Size AA) battery (not
supplied) by matching the
diagram in the battery compartment
and close the lid until it clicks into
place.
OPEN switch
Raise
Press
 to the
Insert the

end first.