When Using The Ac Power Adaptor - Sony BDP-S1 Manual Addendum: Audio Codec Information (firmware ver 2.0 or higher) Operating Instructions Manual

When using the AC power
adaptor
You can use the player powered by the AC
power adaptor without the battery.
AC power adaptor
to AC outlet
1
Connect the AC power adaptor to
the DC IN 3V jack of your CD player
and an AC outlet.
Notes on the AC power adaptor
• Disconnect all power sources when the player is
not to be used for a long time.
• Use only the AC power adaptor supplied. If
your player is not supplied with the one, use an
AC-E30HG AC power adaptor (not available in
Australia and Argentina). If you use any other AC
power adaptor, malfunction may occur.
• Do not touch the AC power adaptor with wet
hands.
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor, disconnect it
from the AC outlet immediately.
to DC IN 3V
Polarity of the plug
13