Usage Notes; Maintenance Instructions; Storage Instructions - Matco Tools Megajump Manual

Usage Notes

1. Always make sure that the blue plug on the jumper cable is tightly inserted
into the jump starter socket before jump starting the vehicle. Otherwise it
will affect the performance of the device and could cause melting on the
blue plug.
2. Always ensure the jumper cable clamps have a good connection, check the
vehicle battery connector for excess buildup and clear any away before
jumping start the vehicle. DO NOT attempt to jump start after 3 failed at-
tempts. Otherwise, it will damage your jump starter. If after 3 failed at-
tempts please check your vehicle for other problems, it is likely that your
vehicle has an underlying issue causing it not to start.
3. DO NOT disassemble the jump starter. It can be dangerous and
will void the warranty.

MAINTENANCE INSTRUCTIONS

1. After use and before performing maintenance, unplug and disconnect the
unit.
2. Use a dry cloth to wipe all battery corrosion and other dirt or oil from the
battery clamps, cords, and the outer case.
3. Do not open the unit, as there are no user-serviceable parts; any
sonnel.

STORAGE INSTRUCTIONS

1. Charge battery to full capacity before storage.
2. Store this unit at temperatures between -4°F–+104°F (-20°C–+40°C).
3. Never completely discharge the battery.
4. Charge after each use.
5. Charge at least once every 3 to 6 months if not in frequent use, to prevent
over-discharge.
Page 9
-